November 21, 2026 • Blog • IVD Diagnostics • 4 Min Read

Blood Collection Tubes: Colours, Uses and the Order of Draw

Each blood tube contains a different additive, and drawing them in the wrong order can carry additive from one tube into the next and spoil results. This guide explains the tube colours, which tests each is used for, and the standard order of draw.

By Pulse Team · Updated November 21, 2026 · 4 min read
Share

The standard order of draw is: 1. blood culture, 2. citrate (light blue), 3. serum (red or gold), 4. heparin (green), 5. EDTA (lavender), 6. fluoride (grey). Following this order stops additives from one tube contaminating the next. Tube cap colours can vary by maker, so go by the additive.

Why the Order Matters

Blood tubes contain additives that stop clotting or help it, or protect glucose. If blood carries a little additive from one tube into the next, results can be wrong. The Clinical and Laboratory Standards Institute (CLSI) sets the order to prevent this, and it applies whether blood is drawn by syringe, tube holder or vacuum tubes.

The Order of Draw

OrderTube (common cap colour)AdditiveCommon tests
1Blood culture bottlesCulture mediumBlood cultures
2Light blueSodium citratePT/INR, APTT, D-dimer
3Red or gold (SST)None, clot activator or gelBiochemistry, serology, CRP, drug levels
4GreenHeparinSome biochemistry
5Lavender or pinkEDTACBC, HbA1c, blood group
6GreySodium fluoride / potassium oxalateGlucose, lactate

Test lists are from the Pathology Queensland tube guide. Cap colours vary between makers and countries, so always check the additive printed on the tube.

Setting up a lab or clinic?Get a written quote, brochure or demo from the Pulse team.

A Tip for Clotting Tests

Plastic serum tubes with clot activator can affect clotting tests, so they must not be drawn before the citrate tube. Only blood culture tubes, glass plain tubes or plastic serum tubes without clot activator may go before it. Citrate tubes must also be filled to the line.

Good Practice

From Tube to Analyser

EDTA tubes go to the haematology analyser for a CBC. Serum, heparin and fluoride samples go to the biochemistry analyser for tests such as liver and kidney function and glucose. See our CBC normal range, how a biochemistry analyzer works and lab QC guides.

Pulse Lab Analysers

Blood Tube Order of Draw: Key Facts

Blood Tube Order of Draw: FAQs

What is the correct order of draw for blood tubes?

Blood culture, then citrate (light blue), serum (red or gold), heparin (green), EDTA (lavender) and fluoride (grey), as set by CLSI.

Why does the order of draw matter?

It stops additives from one tube carrying over into the next and changing test results.

Which tube is used for a CBC?

The EDTA tube, usually with a lavender or pink cap.

Which tube is used for blood glucose?

The fluoride oxalate tube, usually with a grey cap, which stops cells using up the glucose.

How many times should blood tubes be inverted?

Gently 6 to 8 times, or as the tube maker advises. Do not shake them.

Does Pulse supply lab analysers?

Yes. Pulse supplies the ZT360 and ZT370 haematology analysers and the ZT Smart SAA biochemistry analyser. Message +91 90711 01108 for a quote.

Sources

This guide is for general information. Follow your laboratory's collection manual and the tube maker's instructions. Last reviewed November 2026.

Related Reading

MORE READINGExplore More Blogs →

Setting up a lab or clinic?

Get a quote for Pulse haematology and biochemistry analysers.

Get a Quote
Welcome to Pulse, How may I help you?
Hi!👋
Pulse AI Assistant