July 26, 2026 • Blog • Renal Care • 4 Min Read

Transducer Protector Price in India: Dialysis Use and Safety

A transducer protector is one of the cheapest parts of a dialysis session, but it guards the machine and the next patient from blood. This guide covers price, use and the safety rules.

By Pulse Team · Updated November 14, 2026 · 4 min read
Share

A dialysis transducer protector in India mostly costs Rs 5.50 to Rs 11 each, based on online listings checked in November 2026. A pack of 200 is listed at about Rs 1,296 including GST, or about Rs 6.50 each. Use a new one on every pressure line for every session, and change it at once if it gets wet.

Transducer Protector Price in India

These are listed prices from Indian online stores, checked in November 2026. They are other brands' prices, not Pulse prices.

Where listedListed priceNotes
Most B2B listings, per pieceRs 5.50 – 11Most sellers on one large B2B marketplace fall in this range
Higher-priced single piecesRs 14 – 22A few branded or 0.22 micron versions
Pack of 200, online storeRs 1,296 (about Rs 6.50 each)0.2 micron hydrophobic filter, sterile, price includes 5% GST

Some listings show much higher prices, such as Rs 100 a piece. Check whether the price is for one piece or a box before you compare.

What Does a Transducer Protector Do?

A dialysis machine checks the pressure in the blood lines all through the session. Thin pressure lines run from the blood tubing set to pressure sensors (transducers) inside the machine.

A transducer protector is a small filter that sits between the pressure line and the machine. Its filter lets air through, so the pressure reading stays correct, but it stops blood and fluid. This keeps blood out of the machine and stops germs passing from one patient to the next. For the rest of the circuit, see our blood tubing set price guide.

Ordering dialysis consumables?Get a written quote, brochure or demo from the Pulse team.

What Happens If a Transducer Protector Gets Wet?

A wet filter can block the pressure reading. Worse, blood can get past it into the machine, where staff cannot see it. A US FDA safety alert, as reported by Relias Media, said wet protectors and sudden pressure changes had led to blood getting into dialysis machines. It also said this kind of hidden blood is not found by routine service. The alert advised:

Single-Use Rules in India

The 2026 Operational Guidelines for the Pradhan Mantri National Dialysis Programme (PMNDP) say blood lines, transducer protectors, IV sets and catheters should not be reused. The same guidelines ask for patients with hepatitis B or C to be dialysed in a separate area on their own machines.

The US CDC gives the same advice: use external protectors on the arterial and venous pressure lines for every treatment, change them between patients, and do not reuse them.

How Many Transducer Protectors Do You Need?

You need one protector for each pressure line your machine uses, for every session. Most set-ups monitor at least an arterial and a venous line, and some machines have more pressure ports. Check your machine's manual for the exact number.

For example, a unit with 5 machines running 3 sessions a day for 26 days a month does 390 sessions. With 2 protectors a session, that is 780 protectors a month; with 3, it is 1,170. At Rs 5.50 to Rs 11 each, that is roughly Rs 4,300 to Rs 12,900 a month (our estimate). We suggest keeping at least one extra month of stock, because wet protectors must be replaced during sessions. For the full cost per session, see our dialyser price and consumables guide.

What to Check Before You Buy

Pulse PD-TP Transducer Protector

Pulse supplies the PD-TP transducer protector. It is single use, keeps blood and fluid away from the machine's pressure sensors, and works with standard dialysis systems. Pulse also supplies blood tubing sets, AV fistula needles, dialysers, haemodialysis catheters and the PDM-6000 machine, so one supplier can quote for the whole session kit.

Transducer Protector Price: Key Facts

Transducer Protector Price: FAQs

What is the price of a transducer protector in India?

Online listings checked in November 2026 show most dialysis transducer protectors at Rs 5.50 to Rs 11 each, with a few up to about Rs 22. A pack of 200 is listed at about Rs 1,296 including GST.

What does a transducer protector do in dialysis?

It is a small filter between the pressure line and the dialysis machine. It lets air through so the machine can read the pressure, but stops blood and fluid getting into the machine.

Can a transducer protector be reused?

No. The 2026 PMNDP guidelines say transducer protectors should not be reused, and the US CDC says to change them between patients.

What should you do if a transducer protector gets wet?

Change it at once and look at it. If fluid reached the machine side, a trained technician should check the machine after the session and clean it before the next patient if blood got inside.

How many transducer protectors are used per dialysis session?

One for each pressure line the machine uses. Most set-ups use at least two, for the arterial and venous lines. Check your machine's manual.

Does Pulse supply transducer protectors?

Yes. Pulse supplies the PD-TP single-use transducer protector, along with blood tubing sets, fistula needles and dialysers. Message +91 90711 01108 for a quote.

Sources

Prices are listed prices from public stores and change often. Follow your machine maker's instructions and your unit's infection control policy. Last reviewed November 2026.

Related Reading

MORE READINGExplore More Blogs →

Setting up or stocking a dialysis unit?

Get one quote for transducer protectors, blood tubing sets, fistula needles and dialysers.

Get a Quote
Welcome to Pulse, How may I help you?
Hi!👋
Pulse AI Assistant