July 21, 2026 • Blog • Hospital Setup • 4 Min Read

How to Report a Medical Device Adverse Event in India

A pump gives the wrong dose, a lead breaks, a stent kit arrives with a torn pack. This guide shows hospitals what to report under India's device safety programme, how fast, and how to set up the process.

By Pulse Team · Updated November 10, 2026 · 4 min read
Share

In India, hospitals report medical device problems to the Materiovigilance Programme of India (MvPI). Under its 2026 hospital guidance, serious events such as a death must be reported within 15 days, and other events that could cause harm within 30 days. Report on the ADRMS portal, by email, or on the helpline 1800 180 3024.

What Is MvPI?

MvPI is India's national programme for medical device safety. It started in 2015 and is run by the Indian Pharmacopoeia Commission (IPC), which collects reports through a network of more than 775 monitoring centres. An "adverse event" is any harm, or risk of harm, linked to a medical device, even if no one is sure the device caused it.

Reporting is rising fast. Data released on 6 November 2026 showed serious device-related events grew from 808 in 2020 to 2,176 in 2025, a total of 9,373 since 2020.

What to Report

Reporting Timelines

Type of eventReport within
Serious event: death or serious harm to health15 days
Suspected unexpected serious event (also tell the licensing authority)15 days
Non-serious event that could cause harm30 days
Near miss or fault with no harmRecord it promptly

These timelines come from the IPC's Version 1.3 hospital guidance, released with WHO India in September 2026.

Want a supplier who helps when a device fails?Get a written quote, brochure or demo from the Pulse team.

How to Report

Sending a report does not mean the hospital, the maker or the device was at fault. The form also says patient names are kept private.

What the Form Asks For

SectionWhat to fill in
ReporterWho is reporting and whether the maker has been told
A. DeviceBrand name, maker, model, lot or batch number, serial number, software version, last service and calibration dates
B. EventDate, place, who was using the device, what happened and what was done with the device
C. PatientAge, sex, weight, history and outcome
D. HospitalName and a contact person
E and FCause found and the maker's action, for follow-up reports

Most of this comes from your device records. If each device already has a log with its batch, serial number and calibration dates, a report takes minutes, not days. See our NABH medical equipment requirements guide for the records to keep.

Set Up Reporting in Your Hospital

  1. Name a nodal officer for the hospital, and a contact person in each department.
  2. Make reporting easy: a simple form, an email address or a group chat where staff can flag a problem.
  3. Check and upload: the nodal officer checks each report and uploads it to the ADRMS portal on time.
  4. Train staff often, especially nurses, resident doctors and biomedical engineers.
  5. List critical devices in the ICU, OT, cath lab and emergency, and review them weekly or monthly by risk.
  6. Keep the device and its packing for checks, and keep service logs and the cause analysis on file.
  7. Tell the supplier so the maker can investigate and issue a safety notice if needed.

What to Expect From Your Supplier

A good supplier helps you report, not hides the problem. Ask for: the batch and serial details on every invoice, a named service contact, help with the cause analysis, and a written promise to share recalls and safety notices. Pulse supplies, installs and services its devices and trains your staff on day one. Ask us for batch and serial details with every delivery. See Pulse Service and Support.

Medical Device Adverse Event Reporting: Key Facts

Medical Device Adverse Event Reporting: FAQs

How do I report a medical device adverse event in India?

Report it to the Materiovigilance Programme of India (MvPI). Use the ADRMS portal, email the reporting form to mvpi.ipcindia@gmail.com, send it to your nearest monitoring centre, or call the helpline 1800 180 3024.

What is the time limit for reporting a serious device adverse event?

Under the IPC hospital guidance of September 2026, serious events such as a death or serious harm must be reported within 15 days. Other events that could cause harm must be reported within 30 days.

Should we report a device fault if no patient was harmed?

Yes. Near misses, faults, wrong readings, damaged packs and wrong labels should all be recorded and reported, even when no one was hurt.

What is MvPI?

MvPI is the Materiovigilance Programme of India. It started in 2015, is run by the Indian Pharmacopoeia Commission and collects reports of harm linked to medical devices through more than 775 monitoring centres.

Does reporting an adverse event mean the hospital was at fault?

No. The reporting form states that a report does not mean the hospital, the maker or the device caused the event, and patient names are kept private.

Does Pulse help hospitals when a device problem occurs?

Yes. Pulse services the devices it supplies. Ask for batch and serial details with every delivery, and contact the service team if a problem occurs. Message +91 90711 01108.

Sources

This guide summarises public MvPI material for hospitals. It is not legal advice. Follow the latest IPC notices and your licensing authority for exact rules, and use the current version of the reporting form. Last reviewed November 2026.

Related Reading

MORE READINGExplore More Blogs →

Equipping a hospital that takes device safety seriously?

Get one quote for equipment, installation, training and service, with full batch and service records.

Get a Quote
Welcome to Pulse, How may I help you?
Hi!👋
Pulse AI Assistant